Buffalo linkstation firmware update mac

Now, let's move on to test 2. Rebuilding the unmatched replacement drive worked, but only after some highly unnecessary hassle. I wound up contacting tech support, and was told that formatting a drive after inserting it into the chassis would not work. I was advised to remove the drive, unscrew all four screws from the bracket, connect it to a PC, and do some fancy command-line magic.

Then, and only then, was I to screw the drive back into its bracket, return the drive to the array and attempt to rebuild it.

All replies

It turned out that worked, but the Buffalo initially showed the wrong capacity for the replacement 3 terabyte drive. I had to do another shutdown and startup to get the right capacity. The tech support folks also told me to update the firmware. The gotcha was that the web interface for the device insisted I was running the latest firmware update -- which I was not. Tech support told me to download a special application, install it on my PC, connect into the NAS, and then update the firmware.

From my many interactions with the tech support folks, I got the definite impression that disk and system management is meant to be done from Windows, and the web interface on the NAS box itself was an afterthought. That's a big pain, and a big fail. There is no option whatsoever to rebuild the array for a larger drive.

This machine will NOT grow with you over time. It got barely two stars out of five. And it gets worse. Other than some sort of malware scanner, this box has no add-on apps at all. Buffalo doesn't sell a bare system. It's always sold with drives included, so I found it a bit difficult to determine price per bay. That's the third most expensive of our set. It does offer a network recycle bin.

The Buffalo failed completely when I attempted to move my test directory of Mac files over to it. I was told by my friendly tech support tech that it "does have known problems with Mac files. Finally, the management interface itself is dated. It would have been compelling in , but not in The complete lack of applications, mid-level performance, and higher-end price resulted in our lowest usability and performance rating: only two out of five stars.

Given the wealth of much better offerings on the market, I just can't recommend the Buffalo. From the terrible RAID performance to the reliance on low-level Windows command line magic, to the inability to scale over time, to their old-style interface and lack of applications, to its complete failure to manage Mac files, there was more and more bad news at every test. Two stars out of five -- and that's generous. Don't buy this.

Buffalo TeraStation NAS Software, UI, Backup Apps and Software Guide

I'll show you some far better devices, for substantially less money, over the next few episodes. You can do better. Hopefully, as it designs newer products, Buffalo will do better, too. This one seemed phoned in. That's it for today. Stay tuned. We have five more NAS reviews coming, plus a wrap-up where I'll take you behind the scenes to discuss methodology and compare all seven devices side-by-side. As a general practice, if I write something critical about a company or its products, I give the company the opportunity to respond with a paragraph or two explaining their perspective.

I gave that opportunity to Buffalo and it provided the following response. I will say that I disagree with some of what it said, especially based on my lab test results, but it's not impossible that either the device I was sent had some unusual problem or I was wrong and misread something. I will send the box back to Buffalo, and it'll test it out in case something was wrong with the build itself.

We'd like to start by saying that we were more than a little surprised by this review. Customer response regarding this unit has been overwhelmingly positive. Since there were so many perceived issues, we hope you'll allow us a rather extensive reply. First let's talk about the biggest issue we see. Under normal operation, there is no circumstance where a configuration change should even trigger a restart, much less a shutdown. In fact, the only situation that should require a reboot of a TeraStation is a firmware update, since that essentially involves updating the entire operating system.

We'd like to work with you regardless to try to reproduce your issue. This is not a symptom we have ever seen. To the issue of drive failure, it's difficult to simulate a true drive failure that occurs during normal operation. Under normal circumstances an end user would call our support line to get a drive replacement. The blank, unformatted replacement drive would arrive in the correct drive tray for the TeraStation in question.

Once the replacement is installed it is only necessary to press the function button on the front of the device to initiate a rebuild of the RAID array. If you put a previously used drive in as a replacement, it can cause issues. The windows diskpart commands are sort of an overkill in case you used a drive with TeraStation partitions on it, that gets recognized as a system unit.

Very rarely will a customer have the very specific situation that is resolved by that procedure.

How to Fix the Buffalo Linkstation NAS - Partition Not Found Error : FATMIN

The lock on the door is to prevent a curious user from inadvertently causing a problem. Under normal operation the only time the door would need to be opened is to replace a failed drive, which should be a rare occurrence. We disable the locks in our lab for the most part.


  • fireface uc mac pc umstellen!
  • reload mac os without cd.
  • file sharing mac lion server.
  • Can't Connect & Configure New NAS… - Apple Community?
  • mac mini 2006 hard drive!
  • mac cherry lip pencil review?

The lack of installable apps is because we include the functionality most useful in a business network by default. It also contributes to device security. While some NAS devices with installable apps have been hit with app-based ransomware recently, we're not aware of any such occurrence on our units. We believe that our closed firmware approach contributes to this. It's unclear what speeds you were seeing, but if it's substantially lower than this we'd like to investigate why.

Wie zu: Sie Daten vom Duett von LinkStation und TeraStation wiedererlangen

Moving on to error notifications, yes, we rely on SMTP. While it is true that most ISP's block TCP port 25, most major webmail provider allows the usage of other ports specifically to enable sending mail. We have provided walkthroughs for these configurations in our knowledge base.

We also integrate with the major SNMP vendors by using TeraStation specific templates available as an alternative to email notifications. In addition, NAS Navigator will display an error available for Windows and Mac and you should get a blinking orange information icon when logged into the user interface. Regarding the perception that it was designed to be managed in Windows, all management of the device is done through the web interface, and it's not possible to change any configuration on the device outside of it. NAS Navigator is simply installed to make finding units on a network easier.

As far as "known problems with Mac files", we've been unable to replicate the error you saw. We did say that we "had seen some problems with Mac system files" but those are limited to the replication function of the TeraStation, and only when using AFP. You pointed out that the RAID can't be expanded. This is partially accurate. Our four bay units are shipped fully populated. In order to change to larger drives you would have to replace all four drives.

With a TeraStation this would require creating a new array. Our eight and twelve bay units are available populated with only four drives allowing the array to be expanded by adding additional drives. This is accomplished through the web interface with no down time. A RAID 5 or 6 array can have drives added on the fly. We believe some of this may be due to the differences inherent in being the only 'drives-included' NAS in the group, which is specifically to save time and therefore money for installers and IT pros. Enthusiasts may enjoy the out-of-box experience of a ground-up build - but if you pay the bills by selling your expertise and service to clients then this can be a luxury you can't afford.

You can follow my day-to-day project updates on social media.

Where the beep is Reopen Closed Tab in Chrome 78?